Trijicon has announced that its Q-LOC Technology is now available in a full range of mounting solutions to fit nearly any optics platform.
The Q-LOC Technology is Trijicon’s patented quick-release optics mounting system, which features multiple proprietary recoil lugs to ensure total rail engagement. It enables shooters to easily remove and re-attach an optic with a Q-LOC mount without the need to re-confirm zero. Heavy-duty springs further enable one-handed operation while also ensuring secure retention under hard and repeated recoil. Q-LOC mounts also feature compact, circular knob designs to minimize the hazards of gear snags while also facilitating one-handed mounting and removal.
For 2024, the company has expanded the Q-LOC Technology line with a new system of accessory rings and adapter plates, which were developed to work in conjunction with Trijicon Quick Release Ring Mounts featuring Q-LOC Technology. The new accessory ring caps – which are offered in 30mm, 34mm, and 35mm – and adapter plates will allow the user to easily add a secondary optic or other accessory to their platform. This could save on rail space, while also allowing for a full optics solution on one system. The ambidextrous design allows for mounting accessory plates at a 12 o’clock or left/right 45-degree offset position.
In addition, a Picatinny rail option is available for mounting a variety of accessories.
Also launching for 2024 is a full line of Trijicon RMRcc mounts for Picatinny rails and ring caps; as well as an assortment of additional Quick Release Ring Mounts, Bolt Action Mounts, and Cantilever Mounts featuring new heights, ring sizes, and integrated cants. These all feature the company’s proprietary design that offers both quick-release and return to zero, while Trijicon’s mounts with Q-LOC Technology are offered for Trijicon red dots, thermal optics, and a wide range of riflescopes.
All Trijicon mounts with Q-LOC Technology are manufactured in the U.S. and made from 6061-T6 aluminum with precision-cut dimensions to accommodate any platform and ensure optimal placement on MIL-STD 1913, NATO, non-mil spec, and even damaged rails.
Trijicon Q-LOC Technology Mounts And Accessories
For 2024, new Trijicon Accessory Ring Caps are available in 30mm, 34mm, and 35mm and are designed to replace the front or rear cap sold with Q-LOC style mounts. Three mounting locations allow red dot or Picatinny rail mounting plates to be attached at 12 o-clock or 45-degree offsets.
Trijicon is also introducing RMR, RMRcc, and Picatinny footprint Accessory Ring Plates that were also designed to mount to Accessory Ring Caps sold for Q-LOC style mounts, while the plates can be mounted at the 12 o-clock location for heads-up shooting or 45-degrees for close range shooting through adjusters. The Accessory Ring Plates are now available in low, medium, and high thicknesses for optimal balance, optic position, and adjuster accessibility.
Built for 30mm, 34mm, and 35mm tube optics and designed to keep the optic as low as possible for hunting and long-range precision rifle applications, the Q-LOC Ring Mounts were developed specifically for variable power optics, these rings are perfect for mounting Trijicon optics with an array of objective sizes.
The Q-LOC Technology Bolt-Action Mount is optimized for proper eye alignment on bolt-action, lever-action, pump-action, autoloader, and single-shot rifles with a scope rail. The Bolt Action Mounts are available in two heights to accommodate scope objective lenses with sizes less than 42mm (1.06 inch height), up to 44mm (1.125 inch height). Models accommodate both 30mm and 34mm tube scopes.
The Trijicon Q-LOC Cantilever Mounts were also designed with the perfect dimensions for optimal eye alignment on AR platform rifles, and are positioned higher than Bolt Action models for a proper AR cheek weld. 30mm and 34mm mounts are available in 1.535-inch, 1.590-inch, and 1.93-inch heights to accommodate all riflescope objective sizes. The 1.535-inch Cantilever Mount was designed for use with most clip-on thermal devices, while 35mm mounts are also available in 1.70 in. height.
Engineered for both the Compact and standard-size Trijicon ACOG, as well as the Trijicon VCOG, the Electro-Optics Mounts family of mounts provides an optical axis height of 1.535 inches, ideal for clip-on devices. The latest Trijicon REAP-IR and IR-HUNTER thermal optic models are also equipped with these quick-release mounts. The new Trijicon ACOG Extra High Mount with Trijicon Q-LOC Technology is designed specifically for heads-up shooting with the Trijicon ACOG.
Red Dot Mounts are also now available in Low, Full Co-Witness, Lower 1/3 Co-Witness, and 45-degree Offset, this family of mounts is specifically designed for the Trijicon RMR, RMRHD, RCRTM, RMRcc, SRO, and MRO families of red dot sights, while for Full Co-Witness models, the backup iron sights and the red dot align to create the sight picture when looking through the center of the optic. When looking through the center of the optic with the Lower 1/3 Co-Witness mount, the backup iron sights will appear in the lower portion of the sight picture and the 45-degree Offset mounts provide users with a low-profile and ambidextrous mounting solution for backup red dots.
The new line of Trijicon Q-LOC Technology Mounting Systems is now available.
