Spray Painting Guns and Optics Part 1: Why Do People Do It?

I was beyond belief the first time I saw a buddy’s gun that had been spray painted. It wasn’t an old junk gun that he was playing around with, it was a Daniel Defense he just purchased. I knew he was buying a new AR-15 and wanted to see it. Before I could see the new gun, he already had it hanging up in his garage by a wire, covered in spray paint.

My first thought was okay, it’s happened; he snapped. I asked him why on earth he would want to spray paint his most expensive rifle. His response was, “Why would I mess with painting a cheap rifle?” I had only known this guy for a couple of years, and he was older than me. He was a Vietnam vet who saw combat during two separate deployments and went on to join a special forces unit after the war.

He then explained to me how much a rifle can stand out to a sniper or other enemy soldiers. That was a long time ago and since then I have known a lot of guys that spray-paint their guns. Many of them just want their gun to look cool and think it’s fun. There is a lot of debate on this subject, and we won’t solve it today. But we can look at how and why people do it.

Why spray paint a gun?

Half of gun lovers say never spray paint a gun and the other half say go for it. So, for a moment, let’s focus on the half that says go for it. There are multiple reasons someone may want to paint their gun. Here are some of the most common reasons people spray paint their guns.

It can blend into the environment.

The first and most common reason is to make it blend into the environment. Hunting is one of the most common needs for adapting a gun to the area around you. If you travel a lot and want to set up your gun and gear to blend in with a specific environment, this is a good way to do it.

It’s easy to do, cheap, and fast.

Not everyone wants to spend a lot of money to have a permanent paint job put on their gun. Spray paint isn’t permanent, which we will talk more about shortly. But if you need or want to change the look of your gun on a regular basis, a permanent finish is not ideal.

Spray paint is a few dollars per can, and you can find just about any color you want. If you don’t like the color, just paint it again. For those who want to adapt as they go, spray paint is the most helpful form of camouflage. It’s fast and easy to find.

If you are on a hunting trip and it snows, you may decide you want a white and gray camo finish instead. A quick stop at a local store and you can have your gear set up in a short time. I know a guy who paints his self-defense rifle several times a year so that it always matches the area around him.

It’s not a permanent paint job.

A good finish on a gun is durable and long-lasting. Cerakote and other types of finishes are known for being tough. This is good if you want that nice finish that will last a lifetime. But not if you want to strip it back off. Spray paint is nothing as close to a durable finish as professional-grade finishes on guns. Some of the anti-paint guys will point this out. But for those on the pro-paint side of the argument, that is the point. Spray paint is not supposed to be a permanent finish. It’s a camo that can be modified, completely changed, or removed. With a few common cleaning tools and solvents, a spray-painted rifle can be stripped back down to the factory finish.

Keep in mind that some plastic parts on a gun will not clean as easily or come off at all. But any metal part of the gun can be cleaned up without much effort. I recently removed spray paint from an ACOG which I will talk about in Part Two of this article.

How do you spray paint a rifle?

This is another area that is up for debate. Everyone has their own opinions, methods, and reasons. So, I say paint it how you want, it’s your rifle. Some guys like to spread grass or leaves over their gun to give it that natural camo look. Others use netting or other materials with designs to break up the pattern.

There isn’t a right or wrong way when you’re using spray paint. The idea is to blend in around you. If you live in the desert, a solid tan or FDE color may work just fine. If you live in an area with lots of trees, a brown, tan, and green finish may be what you want. You can get creative if you want, or you can keep it simple and give it a quick paint job.

Some people strip their guns down when painting them, but I don’t see the point in this. There are certain parts of the gun, however, that should be covered. Any opening into the gun should be covered with something to keep paint out of the critical areas of the gun. The mag well, ejection port, and barrel are all examples.

Painter’s tape works great for this, but you can use just about any kind of tape. The kind of paint used is another hot topic. I have used all kinds of paint. Again, this isn’t supposed to be a professional finish; it’s camouflage. If the paint fades and scratches, great. That just helps it blend in even more. Make sure to clean the gun and remove any dirt and oil before starting. A primer isn’t needed because this isn’t a permanent paint job.

Should you paint the accessories too?

One thing you want to consider when painting accessories is the guns they are used on. If you have a quick detach system for your light and use it on multiple guns, you may not want to paint it. But if you are leaving an attachment on that gun and don’t plan to use it anywhere else, then paint it.

If you are going for that “cool” look then you may want to put more thought into this. But if your only goal is to make your gun camo, every part does not have to be painted the same. I cover the trigger area on my gun, so paint doesn’t make its way up into the trigger assembly. I’m also not concerned about the trigger being a solid color because it’s a small part of the gun. If you want to spray paint your gun, experiment on some other items first and find the look you want.

Planning to spray paint your gun?

Spray-painting a gun isn’t for everyone and there’s nothing wrong with that. I know people that say never do it, but I think it’s up to you. I also know guys who say you should paint every gun you own, and I don’t agree with that either. Painting a gun could reduce the gun’s value for resale, so keep that in mind.

I don’t spray paint very many of my guns. I like the finish and look of them when I buy or build them. When I do spray paint a gun, I use my cheapest gun because I’m just doing it for practice and fun. If I really need one of my quality, expensive guns to be camouflaged, I can always do it later because again, spray paint is cheap and fast.

Get some tips from others, but in the end, make your rifle look however you want. Keep in mind the serial number cannot be covered to the point that it is not readable. Other than that, painting a gun can be fun and has its uses. If you paint yours and decide you really want it back the way it was, the paint can be removed (in most cases). In Part Two, I will discuss the process of removing paint and show how I cleaned up an optic I recently purchased.