Williams Fire Sights: Futuristic Williams Gun Sight from the Past

4885
0

Fiber optic iron sights are nothing new; They’ve been around for a few decades. And while (some) tactical guys might prefer night sights, or various other pistol sights, fiber optic pistol sights have several advantages that make them exceptionally useful for shooters looking to decrease their splits (Splits being the time between their shots). One such model of fiber optic (coincidentally the one we will be discussing today) is Williams Gun Sight known as the “Williams Fire Sights”. 

Williams Fire Sights

Futuristic Williams Gun Sight… From the Past

By redirecting light through the fiber optic tube towards the shooter’s eye, these sights glow with even the faintest amount of ambient light. In doing so, these sights dramatically increase their visibility and contrast, making the shooter’s eye naturally find them substantially faster than traditional sights.

Williams Gun Sight Company has been making quality fiber optic sights for years. According to their website, “Williams has been on the range since 1926”. While that’s more than a few decades older than me, I can attest that I’ve seen Williams’ sights on various pistols since I started shooting – and for good reason.

P226 Williams Gun Sight ("Williams Fire Sights")

Here is the SIG P226 with Williams Fire Sights installed propped up on a box of good old-fashioned Federal premium 9mm.

Sick SIG Seeks Sights

Williams makes, what are in my opinion, the most durable fiber optic sights in the world. Unlike the vast majority of the knockoffs that utilize plastic for nearly every portion of the sight, Williams uses actual aircraft-grade aluminum and even steel on their shotgun front sights.

So it was serendipity that the front sight on my SIG P226 snapped off during a 3-gun match a few months ago leaving me sightless. So I sent an email to the fine folks at Williams Gun Sight Company, and they sent me a set of their new Fire Sights for the P220-series of handguns.

Williams Fire Sights piled up.

From the Williams Gunsight Company Instagram “Some of our Firesights assembled and ready for installation on Some of our Firesights assembled and ready for installation” These were specifically for the S&W Victory but you get the idea.

While there are several available configurations, I decided to get something a little out of the ordinary for me, just to get a better idea of the clarity and utility of their sights. So instead of simply getting an illuminated front sight post, I got a pair of contrasting posts and notch fiber optic sights.

The rear sight is fully adjustable for windage and elevation and features a fluorescent green, “U” fiber optic rod bent to protrude out the rear sight equidistant from each other. In effect, this means the rear sight on your pistol will have two glowing green beacons for rapid sight acquisition.

To make sure I didn’t accidentally overly-focus on the rear sight, I had Williams send me a bright orange front sight post to contrast better with the green.

But I’m not here to review fiber optics as a whole, but rather how well Williams builds their sights. In a word, solid.

Williams Fiber Optic Gun Sights

Here is the SIG P226 again rotated to show how the orange front sight contrasts well with the green rear on the Williams Fire Sights.

Like a Rock

Williams builds these things like tiny, super-bright tanks. Thank God. I tend to treat my equipment like a rented mule, so I have a tendency to beat the hell out of my stuff. In fact, if the sights weren’t built so well, they would have easily broken when I did the following little modification to them.

While removing my original sight, I had to really hit the old sight base hard to drive out the front sight’s dovetail. Consequently, the dovetail slot itself was accidentally enlarged. Because of this, the Williams front sight would slide in without issue, but wouldn’t retain itself properly during the recoil of firing. Again, this wasn’t because the design is faulty, it’s because I beat up my handgun during a match.

Williams FireSight Front Sight

The Williams FireSight front sight post glowing brilliantly – Notice the scuff marks from peening the sight in place on the gun’s out-of-spec dovetail post accidental enlargement. Like a rented mule, remember?

Even still, what’s really interesting is that I was able to, “fix” the Williams sight to enable it to fit into my gun. Now, if you’re wondering why I would adjust the sight and not the gun’s dovetail, I always follow the advice of an old gunsmith I knew. He told me to never modify the most expensive part.

In this case, the SIG p226’s slide is a couple hundred bucks, while the Williams Fire Sights retail for only $62.95. So, I decided to modify the sight.

Williams Fire Sight sitting on black background.

Williams Gun Sights says, “Even in low lighting conditions, Williams Fire Sights remain illuminated and highly visible. Better visibility equals faster sight and target acquisition, leading to faster and more accurate shooting. Our Fire Sight lineup provides fiber optic sights available for numerous makes and models.” You can find more of their stuff over at @williamsgunsight on Instagram.

Old School Fix for Loose Sights

Now, obviously, you can’t use adhesive or tape to attach a front sight to a pistol, the action is too violent for normal super glue to hold. And, most bonding agents wouldn’t do so well with the heat of the slide as the gun warmed up.

The solution?

Peening.

Basically, you’re expanding the material of the sight’s dovetail, by hitting the top of it with a rounded punch. Now full disclosure, this will most likely scuff the finish and dent the material – it’s supposed to.  I simply put the stripped slide into a padded vice, inserted the front sight, then peened both sides with a punch and a standard gunsmith’s light hammer.

The result is rock-solid.

I’ve heard this method is considered by many to be a temporary fix, but in the hundreds of rounds I’ve fired through my SIG with this site, it hasn’t shifted at all. Plus, my first handgun as a young man was a 1911 with the same issue. With that gun, an old Korean War armorer showed me how to peen the sight in place. His work has now held solid for more than a decade.

But I digress, this review is on the sight itself.

SIG P226 Osprey 45

SIG P226 with Williams Fire Sights and SilencerCo Osprey 45 provided by SilencerShop

The Takeaway

Having now fired a few hundred rounds of 9mm Winchester white box 9mm through my P226, I can safely say that sight holds zero perfectly. I’m also starting to really appreciate how well the sights show up in the dark, now that I’m getting to be an old man with poor sight. Ultimately, Williams is continuing their tradition of build bomb-proof, brilliant sights for dozens of firearms at a price that won’t cause sticker shock.

 

Learn more about these and other Williams Gun Sight options online at the WGSC website.

Jim is a freelance writer for dozens of firearm publications, the host of the YouTube channel Burst Review and the youngest author to write a cover story for Shotgun News in its 86-years of operation. Jim loves anything that goes, ‘boom’ but particularly enjoys military firearms from the Cold War and WW2. When he’s not slinging lead downrange he can be round hiking in the mountains with his wife Kim and their vicious attack dog, Peanut.