{"id":411253,"date":"2023-11-13T15:00:09","date_gmt":"2023-11-13T21:00:09","guid":{"rendered":"https:\/\/gunmagwarehouse.com\/blog\/?p=411253"},"modified":"2024-10-10T23:49:44","modified_gmt":"2024-10-11T04:49:44","slug":"kimber-kds9c-full-review-holsters-and-optics","status":"publish","type":"post","link":"https:\/\/gunmagwarehouse.com\/blog\/kimber-kds9c-full-review-holsters-and-optics\/","title":{"rendered":"Kimber KDS9c Full Review: Holsters and Optics"},"content":{"rendered":"

Kimber pistols just have a look that makes you want them. Glancing at a wall full of 1911 pistols, it\u2019s not hard to point out a Kimber. They have nice finishes, detailing on the slides, and grips that set them apart from other 1911 handguns. When the Kimber KDS9c was released, I had to get one. It\u2019s a 1911-style, double-stack, lightweight 9mm pistol with an elegant look. For a double-stack 1911 pistol designed for concealed carry, it needs to be as thin and light as possible.<\/p>\n

Ammo capacity versus the size of the gun is an ongoing debate among many. The smaller the gun, the easier it is to conceal and carry. However, ammo capacity also suffers as the gun gets smaller. On the same note, the larger the gun, the more ammo it can hold and the easier it is to shoot. You also must pack around a lot more gun and weight. That happy medium isn’t going to be the same for everyone. Some people can easily conceal larger guns than others.<\/p>\n

\"Women
The KDS9c is a perfect CCW weapon for men and women. [Photo: Jason Mosher]<\/figcaption><\/figure>Wardrobe, weather, and other factors all contribute to the size of the gun you select. I tend to go with a compact-sized gun in the summer and a larger gun in the winter. For a 1911, the Kimber KDS9c is \u201ccompact.\u201d When compared to average compact pistols, however, it\u2019s not. I place it in that full-size-ish category. Kimber did keep the weight down and the grip fairly thin for a double stack. So, it could be a great option for CCW.<\/p>\n

Overview of the Kimber KDS9c<\/h2>\n

The frame on the KDS9c is machined from billet 7075 aluminum. A light gun is essential for concealed carry. Recoil will be a little heavier, but with a 9mm, it\u2019s completely manageable. Kimber\u2019s Rapide .45 1911 weighs 38 ounces, while the KD9c weighs 25.3 ounces. That\u2019s a big difference when you plan to carry a gun around all day. Even though the KDS9c uses a double-stack magazine, the grey and black G10 crosshatch grips are thin and keep the gun from being wider than necessary.<\/p>\n

At 1.33 inches wide, the KDS9c is just a little thicker than the Rapide’s 1.28-inch frame. The slide is made from stainless steel, with serrations that flow onto the top. One thing that stands out in the design of the KDS9c is the barrel. Kimber gave it several rows of rounded-out groves, which make it look kind of cool. The trigger is a 1911 design and pulls directly back instead of pivoting. That makes this 9mm beauty an accurate shooting gun.<\/p>\n

\"Kimber
The Kimber KDS9c stainless. [Photo: Jason Mosher]<\/figcaption><\/figure>The safety sticks out just far enough to easily push it with your thumb. I didn\u2019t have to adjust my grip at all to drop mags. The mag release can be moved to the right side for those who are left-handed. The Kimber has an oversized slide stop and extended thumb safety to make it easier to control without shifting your grip around. Another thing that is different from many 1911 pistols is the external ejector. A pin that holds the ejector in place is visible from the top of the slide. It has a strong spring and flips shell casings out with a vengeance.<\/p>\n

Sights and optic mounting<\/h2>\n

The KDS9c has a proprietary, serrated rear sight that is adjustable for elevation. I haven\u2019t decided if I like the rear sight yet as it has a blocky, tall look to it. The height is designed for an optic, but, as a stand-alone sight, I could see things catching on it. The Kimber KDS9c is equipped with a windage adjustable green fiber optic front sight. It would have been nice to see some type of dots or color on the back sight.<\/p>\n

\"Optic
To mount an optic on the KDS9c, Kimber requires the purchase of a plate adaptor. [Photo: Jason Mosher]<\/figcaption><\/figure>Now, we get to the optic plate. It took me a while to get used to optics on handguns, but I am now a believer. I don’t use optics on all my handguns, but it\u2019s nice to have the option. Kimber uses a plate cover that attaches with screws from underneath the slide. I\u2019ve sung nothing but praise so far, but the optic plate snuffs out some of my song. To mount an optic, you must first purchase a separate plate with rear sight because they are attached.<\/p>\n

Gone are the days of removing the plate and mounting an optic. I\u2019m guessing Kimber wanted people to have the option of using plates with different footprints. The only option currently on their website is the RMSc footprint for $119.00. I like the RMSc footprint, but If Kimber wanted to make multiple plates, they should have included at least one with the gun. This means you will need to spend an extra $120 on a $1,500 gun before you can mount an optic. For me, it will be iron sights.<\/p>\n

Holsters for the Kimber KDS9c<\/h2>\n

Because the KDS9c is part 1911, many holsters that fit 1911 pistols will work for it. Leather ones work especially well because they have some degree of flexibility. I have a Craft shoulder holster and leather paddle holster that work with the KDS9c. Kimber offers a wide range of leather holsters and a Kydex holster for the KDS9c. Browsing various holster sites, there are not many holster options specifically for the KDS9c. I\u2019m sure more will be soon to come.<\/p>\n

\"Kimber
The Kimber KDS9c fit in all of my 1911 holsters. [Photo: Jason Mosher]<\/figcaption><\/figure>The Kimber KDS9c did fit in my Blackhawk Serpa holster, but the one I have is for a 5\u201d barrel. I was also surprised to see the KDS9c fit into my leather shoulder holster for my CZ 75 B. It fit almost better than the 1911 holsters. Until some good polymer molded holsters are available for this handgun, I recommend going with leather so it can mold to the gun.<\/p>\n

After you mold a 1911 commander holster, it should fit great in the KDS9c. Simple instructions are available online if you haven\u2019t molded a leather holster before. The stainless slide should hold up well to everyday wear. However, the only bad thing about leather is that it can be hard on a gun\u2019s finish after years of use. I will have to see how mine holds up as I start carrying it this winter.<\/p>\n

On the Range with the Kimber KDS9c<\/h2>\n

The KDS9c was an accurate gun, just as I suspected. My trigger gauge showed a 4-pound trigger pull, and the 1911 trigger is about as good as it gets. For a competition gun, a lighter trigger would be better, but for self-defense, this was perfect. Global Ordnance provided some Belom 124-grain ammo for the review, so I was able to put several hundred rounds down range. Having a few other 1911 pistols chambered in 9mm, the KDS9c had a little more kick than they did. With the lighter weight, this isn\u2019t surprising.<\/p>\n

\"Kimber
Even though I purchased the stainless model, I liked the black KDS9c as well. [Photo: Jason Mosher]<\/figcaption><\/figure>Even though the grip is just a hair wider, it didn\u2019t feel like a double-stack<\/a> gun. For those who grew up with a 1911, this is a great modern option for CCW. The block-style sights are not the best for bullseye shooting, but they worked well for quick acquisition. My KDS9c came with two 15-round mags, but I\u2019ve heard Kimber is working on an 18-round mag as well. There didn\u2019t seem to be a break-in period as the gun shot great from the first mag. I did wait until I put a couple hundred rounds through it to try out some hollow point ammo. Hornady Critical Defense<\/a> and Winchester Defender cycled perfectly in the gun.<\/p>\n

1,000 Rounds Later<\/h2>\n

After running 1,000 rounds through the Kimber KDS9c, it\u2019s safe to say that this gun has held up exceptionally well. Reliability is paramount for any firearm, but this is especially true if you plan to carry it for self-defense. Most people want to shoot at least a few hundred rounds through a gun before they feel confident in carrying the firearm. Others like to see even more rounds down range before trusting their sidearms.<\/p>\n

\"Kimber
After 1,000 rounds, the KDS9c is still shooting like new. [Photo: Jason Mosher]<\/figcaption><\/figure>I’m happy to report that there have been zero feeding issues, which is a testament to the gun\u2019s design and craftsmanship. Whether using standard ball ammo or hollow points, the KDS9c has cycled flawlessly every time. It’s not all been sunshine and daisies, though. Unfortunately, the front sight has given me some trouble.<\/p>\n

The fiber optic stem fell out of the frame during my first shooting session. Thankfully, Kimber provides extra fiber stems in both green and orange. I was able to replace it without much hassle. But then it did it a second time after about 500 rounds. Knowing this could very well be my poor optic instillation skills, I had someone with more experience with fiber-optic sights install the next one.<\/p>\n

\"Kimber
The KDS9c is easy to carry because it’s so light. [Photo: Jason Mosher]<\/figcaption><\/figure>At about the 1,000-round mark, the sight fell out for a third time. This baffled me a little as this type of sight is extremely easy to install, and I\u2019ve never had them break before. Once the fiber optic stem is cut to length, you simply melt each end to hold it in place. It should be fairly straightforward and failsafe. That’s not been the case for me.<\/p>\n

I am skeptical of the fiber stems and wonder if I got a bad batch. After careful inspection, it doesn\u2019t appear anything is wrong with the front sight’s metal housing, so I\u2019m guessing this is the case. My friend and I installed another brand and will see how this one holds up over time, but so far, I’ve not been overly pleased with the front sight.<\/p>\n

Even when the fiber stem comes out, the metal front sight is adequate enough to continue firing at your target, so it\u2019s not a huge deal to me; it’s just a matter of figuring out the issue.<\/p>\n

A real fighter or just a looker?<\/h2>\n

Any time a gun company releases that \u201cpretty\u201d gun, it makes you wonder if it\u2019s worth all the hype or if it\u2019s just another gun for display. There is no arguing the Kimber KDS9c is a looker; but after spending some time with it, I feel confident this weapon is more than capable of self-defense. Kimber has great quality control with their products and they use top of the line materials in their guns. A 1911 gun merged with an aluminum frame and double stack mag make it a superior choice for everyday carry. I still don\u2019t like how they did the optic plate, but this gun is a worthy defender. The next time you\u2019re in the store, check one out and see what you think of the look, feel, and weight. It\u2019s a pretty gun on the outside and rugged on the inside. What else could you ask for in a 1911 double stack pistol?<\/p>\n","protected":false},"excerpt":{"rendered":"

The Kimber KDS9c is a fantastic carry option that blends traditional 1911 feel with modern capacity and options. Not only does it look good, but it shoots well to boot!<\/p>\n","protected":false},"author":64,"featured_media":411264,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[2333],"tags":[],"class_list":["post-411253","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-firearm-reviews"],"small_media_thumbnail":"https:\/\/gunmagwarehouse.com\/blog\/wp-content\/uploads\/2023\/10\/KIMBER-KDS9c-DISPLAY-800-600-JASON-MOSHER-300x225.jpg","_links":{"self":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/411253","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/users\/64"}],"replies":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/comments?post=411253"}],"version-history":[{"count":8,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/411253\/revisions"}],"predecessor-version":[{"id":440868,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/411253\/revisions\/440868"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/media\/411264"}],"wp:attachment":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/media?parent=411253"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/categories?post=411253"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/tags?post=411253"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}