{"id":410715,"date":"2023-11-15T15:00:09","date_gmt":"2023-11-15T21:00:09","guid":{"rendered":"https:\/\/gunmagwarehouse.com\/blog\/?p=410715"},"modified":"2025-12-31T08:51:22","modified_gmt":"2025-12-31T14:51:22","slug":"steel-vs-brass-casing-material-matters","status":"publish","type":"post","link":"https:\/\/gunmagwarehouse.com\/blog\/steel-vs-brass-casing-material-matters\/","title":{"rendered":"Steel vs Brass Casing: Material Matters"},"content":{"rendered":"

Gun culture loves to debate. No, that doesn\u2019t even come close \u2013 we obsess about debates! 9mm vs .45; AK vs AR; Double-Action vs Single-Action vs Striker-Fired; and the list goes on. Today, we\u2019re going to make a stop at the steel vs brass ammunition casing debate. Why does it matter which metal we choose for our cartridge casings? Is it really a big deal? Are there any advantages between steel vs brass casing? You\u2019d better steel yourself (pardon the pun) because the answers may shock you!<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Feature<\/th>\nBrass<\/th>\nSteel<\/th>\n<\/tr>\n<\/thead>\n
Reliability<\/th>\n5\/5 – The best for extraction<\/td>\n3\/5 – More issues in some firearms<\/td>\n<\/tr>\n
Reloadable?<\/th>\nYes<\/td>\nNo<\/td>\n<\/tr>\n
Cost<\/th>\n$$$<\/td>\n$$<\/td>\n<\/tr>\n
Corrosion<\/th>\n4\/5 – More resistant<\/span><\/td>\n2\/5 – Less resistant<\/span><\/td>\n<\/tr>\n
Firearm Wear<\/th>\nMinimal<\/span><\/td>\nPotentially higher (debated)<\/td>\n<\/tr>\n
Best For<\/th>\nHandguns, AR-15s, precision rifles<\/td>\nAKs, military-style rifles, high-volume practice<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The Pros and Cons of Brass Cases<\/h2>\n

Brass is more malleable than steel. It\u2019s usually 60% copper with the remainder zinc. So, who cares?<\/p>\n

When fired, brass casings expand and snug up to the firearm\u2019s chamber. Thus, less gas and unburned powder enter the firearm\u2019s chamber and receiver. The brass cartridge then returns to approximately the same size it was before it was fired. This elasticity of brass generally facilitates more positive and reliable extraction.<\/p>\n

\"Nosler
For use in pistols, the author uses brass case ammunition for better reliability and extraction. Nosler’s ASP 124 grain 9mm<\/a> load is of excellent quality. Photo: Jim Davis.<\/figcaption><\/figure>\n

Reloaders gravitate to brass cased ammo, because most can be reloaded. Brass is easily reshaped and resized, which allows for reloading. Firearm users who aren\u2019t into reloading likely won\u2019t be as interested in this quality when looking at casing options.However, reloading can save some coin in the long run for those who shoot high volumes.<\/p>\n

Brass also corrodes less quickly than steel casings. Unfortunately, due to its high copper content, which is rarer than steel, brass-cased ammunition is more expensive than its steel counterpart.<\/p>\n

The Pros and Cons of Steel Cases<\/h2>\n

In World War II, many countries simply couldn\u2019t get brass for their casings, <\/span>so they developed steel cases and the practice stuck. <\/span>In fact, the <\/span>AK platform was actually designed to use steel-cased ammunition.<\/span><\/p>\n

\"7.62x39mm
Plenty of overseas-produced ammunition for military rifles is steel-cased and economically priced. Steel cases are especially popular for rifles in 7.62x39mm<\/a>. It’s seen here with a MagPul AK-47 PMag. Photo: Jim Davis.<\/figcaption><\/figure>\n

Steel-cased ammo\u2019s main positive is that it\u2019s typically less expansive compared to brass alternatives.<\/span> Steel sells for roughly one cent per pound, far cheaper than brass. On the flip side, it permits more gas and unburned powder to escape from the chamber. <\/span>As a result, many believe that steel ammo fouls the firearm more quickly and causes stoppages.<\/span><\/p>\n

Steel cases are not elastic like brass. When steel expands in the chamber, it doesn\u2019t bounce back to its original size. As a result, steel cases are more likely to stick in the chamber of the firearm and cause extraction issues. <\/span>If you intend to use your firearm for personal defense, a case stuck in the chamber is a major problem. <\/span>Also, steel cases can\u2019t be reloaded.<\/span><\/p>\n

Generally speaking, steel-cased ammo has less exact tolerances and consistency than brass ammunition. <\/span>This is potentially because it\u2019s intended for a cheaper market, so cutting some corners keeps the cost down. For firearm users who prefer steel-cased ammo, this is something they accept for the benefit of a less expensive round.<\/span><\/p>\n

\"Hornady
Not all steel-cased ammunition is made to low tolerances. Hornady<\/a> manufactures a steel-cased line of match ammunition that is quite good. Photo: Pew Pew Tactical.<\/figcaption><\/figure>\n

Just because most steel-cased ammunition is produced to lower levels doesn\u2019t mean it has no potential<\/span>. <\/span>Magtech<\/span><\/a>, known for their high quality target ammunition, actually carries <\/span>steel case 9mm ammo<\/span><\/a>. It has all the quality of their other ammunition and proves a point \u2014 just because an ammo is steel-cased doesn\u2019t mean it can\u2019t perform.<\/span><\/p>\n

The moral of that story is this: if you want to use high-quality steel-cased ammo, go with a reputable manufacturer (like Magtech). In that case, steel-cased ammo performs just as well as brass-cased ammo.<\/span><\/p>\n

Extractor Wear?<\/h2>\n

I’ve heard people claim steel-cased ammo accelerates wear on extractors due to the steel being harder than brass \u2014 especially with AR-15s. I’ve also heard some say it will ruin pistol extractors. Personally, I’ve never run enough steel-cased ammo through any of my firearms to see if it degraded the extractors. Furthermore, I don’t know anyone who has done so either.<\/p>\n

I cannot say with any authority if this well-accepted belief is actually true or not. However, I have<\/em> spoken with dozens of people who claim it as gospel. When asked if they’ve ever worn out an extractor by using steel-cased ammo, they invariably said they have not. Yet, somehow, they know it to be an established fact. Take this information as you will.<\/p>\n

Which firearms perform best with steel-cased ammo?<\/span><\/h2>\n

Generally speaking, I don\u2019t cringe at all when running steel-cased ammo through the AK-47. In fact, the ubiquitous AK was designed to run steel-cased ammo. All the examples I\u2019ve ever used chew through steel casings heartily and ask for more <\/span>with no problem.<\/span> Considering the AK was intended for closer-range engagements and isn\u2019t a sniper-grade weapon, I\u2019m not worried about squeezing every ounce of accuracy and performance from it.<\/span><\/p>\n

At the volume of rounds we normally run through the AK, the savings to our pocketbook offered by steel-cased ammunition are well worth it when running that platform. The AK is certainly reliable enough that the extra little bit of fouling escaping from the chamber isn\u2019t going to hurt anything.<\/span><\/p>\n

On weapons such as the AK-74, which fires the <\/span>5.45x39mm cartridge<\/span><\/a>, brass-cased ammo sometimes fails to extract very well because of its softer consistency. <\/span>At times, the extractor rips the head off the cartridge. On the other hand, steel-cased ammunition will extract far better because of its stiffer nature. This isn\u2019t a rule by any means but a general statement.<\/span><\/p>\n

Steel-cased ammo is also suitable for the FAL and other older surplus rifles that extract cartridges with a bit of vigor. The SKS and Galil fall into this category. The extra strength of steel-cased ammo often increases the reliability of the given weapon. Normally, it\u2019s not that big of a deal, but just something to think about.<\/span><\/p>\n

For the AK, I\u2019ve used <\/span>Tulammo<\/span><\/a>, <\/span>Red Army Standard<\/span><\/a>, <\/span>Wolf<\/span><\/a>, and Brown Bear, and they\u2019ve all worked perfectly.<\/span><\/p>\n

A Steel Cased No-No<\/h2>\n

One weapon that I don\u2019t run with steel-cased ammunition is the AR-15 platform. I\u2019ve done so and had issues with feeding.<\/span> In short, it didn\u2019t like to extract. Granted, this was with <\/span>Wolf ammunition<\/span>. At the time, Wolf used a lacquer coating on their casings. <\/span>When encountering a hot chamber, the coating melted and gummed things up, causing issues extracting the casings.<\/span><\/p>\n

\"5.56mm
When the AR-15 is concerned, the author won’t even think about using steel-cased ammunition for it. He insists on brass for reliability. Here is M855 and M193 5.56mm ammo. Photo: Jim Davis.<\/figcaption><\/figure>\n

From what I understand, Wolf no longer uses that coating for their .223\/5.56mm rounds because of this very problem. The reason for the coating is steel casings don\u2019t extract as reliably as brass because they don\u2019t slide as easily. The coating supposedly adds lubricity to the casing. Typically, coatings these days are either lacquer or polymer.<\/span><\/p>\n

The AR platform also has softer extraction than the AK series, which rips cartridges out of the chamber with vigor. Any goop that builds up in the AR\u2019s chamber is not going to create a great experience in the long run. <\/span>For this reason, I exclusively use brass-cased ammunition in the AR-15. <\/span>To me, the savings with steel ammo just isn\u2019t worth it.<\/span><\/p>\n

Steel vs Brass Casing: Which is Better?<\/h2>\n

Well, it all depends. When I give that answer, it frequently results in villagers grabbing their torches and pitchforks and coming for me. <\/span>With all joking aside, steel cased ammo is a great bet <\/span>if you\u2019re using an AK platform. Other military-type rifles likely won\u2019t mind that same diet, either. For the AR platform, brass is what usually works the very best.<\/span><\/p>\n

The cost savings for some firearms for practice at the range or casual shooting make steel-cased ammo a good choice for some firearms. Personally, I use brass-cased ammo for my <\/span>handguns<\/span><\/a>, AR, Lever Action, and <\/span>.22s<\/span><\/a>, but I\u2019m perfectly fine using steel-cased ammo for the AK.\u00a0 On the other hand, there are people that live by the motto “If she won’t eat steel, she doesn’t deserve brass.” Each shooter will have to take stock of whether steel-cased ammunition is worth the extra <\/span>firearm <\/span>maintenance when the firearm isn\u2019t specifically designed to use steel-cased.<\/span><\/p>\n

How about it – which do you prefer?<\/p>\n","protected":false},"excerpt":{"rendered":"

There are many pros and cons to steel vs brass casing ammunition. Regardless of what camp you’re in, if you’re in a camp, they each have a purpose. Let’s discuss each and see which fits your needs more.<\/p>\n","protected":false},"author":37,"featured_media":410783,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[4],"tags":[],"class_list":["post-410715","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-insights"],"small_media_thumbnail":"https:\/\/gunmagwarehouse.com\/blog\/wp-content\/uploads\/2023\/09\/Red-Army-Standard-Wolf-Steel-Case-7.62x39mm-Ammunition-Magpul-PMag-300x225.jpg","_links":{"self":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/410715","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/users\/37"}],"replies":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/comments?post=410715"}],"version-history":[{"count":46,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/410715\/revisions"}],"predecessor-version":[{"id":442132,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/posts\/410715\/revisions\/442132"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/media\/410783"}],"wp:attachment":[{"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/media?parent=410715"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/categories?post=410715"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gunmagwarehouse.com\/blog\/wp-json\/wp\/v2\/tags?post=410715"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}