{"id":406459,"date":"2023-10-05T09:00:15","date_gmt":"2023-10-05T14:00:15","guid":{"rendered":"https:\/\/gunmagwarehouse.com\/blog\/?p=406459"},"modified":"2026-01-08T14:35:17","modified_gmt":"2026-01-08T20:35:17","slug":"vortex-spitfire-3x-prism-scope-the-poor-mans-acog","status":"publish","type":"post","link":"https:\/\/gunmagwarehouse.com\/blog\/vortex-spitfire-3x-prism-scope-the-poor-mans-acog\/","title":{"rendered":"Vortex Spitfire 3X Prism Scope: The Poor Mans ACOG?"},"content":{"rendered":"

Legendary optics like Trijicon, EOTech, and Aimpoint have maintained their reputations for a long time, and not just as the best optics on the planet, but the most expensive as well. This has caused other manufacturers to compete in making an optic that is both durable and reliable while not costing you a gold nugget.<\/p>\n

Vortex makes great products<\/a> and their unconditional lifetime warranty only makes their products more appealing. One of their products that has impressed me is the Spitfire 3X Prism Scope. To some, this is the poor man\u2019s ACOG because the Spitfire runs around $250 while an ACOG will cost you upwards of $800. Both optics are 3X magnified with etched reticles for consistent target acquisition.<\/p>\n

\"Spitfire
The Spitfire Prism Scope is a durable 3x magnification with a Picatinny rail for mounting a red dot. [Photo: Jason Mosher]<\/figcaption><\/figure>The Spitfire has a couple of features, however, that make it stand out in this price range. Besides offering my own opinion, from taking the Spitfire to the range, I will also cover the stress tests I performed on the Spitfire prior to this review. I have a process for reviewing optics that I call FBSD which stands for \u201cFreeze, Bake, Soak, Drop.\u201d<\/p>\n

If an optic will hold up to these basic stress tests, it makes me feel more comfortable using it on my weapons. This type of test isn\u2019t nearly as extensive or brutal as some other tests out there, but it does show us if the optic can hold up to normal abuse from gun enthusiasts.<\/p>\n

What features did Vortex add to the Spitfire Prism Scope?<\/h2>\n

There are a couple of features that I really like about this scope compared to others in the same price range. The first is the illumination settings. The Spitfire has both red and green reticle illumination settings that are clear and easy to see. The etched reticle allows you to use the scope at any time, even with a dead battery.<\/p>\n

The illumination is a bonus feature that makes the reticle easier to see. There are five levels of brightness for both colors. The illumination is powered by a CR2032 battery that is housed in the top of the brightness setting control knob. The other feature I really like is the addition of a Picatinny rail on both sides of the scope.<\/p>\n

\"Vortex
The Spitfire is just a little bigger than an ACOG but has a Picatinny rail for mounting an optic. [Photo: Jason Mosher]<\/figcaption><\/figure>Mounting a small red dot on magnified optics is becoming more popular, and in some cases, they work great. Having a small red dot as a separate unit on the scope gives you the same function as a red dot and flip-to-side magnifier. The difference, however, is that you don\u2019t have to physically move the magnifier back and forth. You just have to shift your gaze from one optic to the other.<\/p>\n

The FBSD (Freeze, Bake, Soak, Drop) Test<\/h2>\n

I live in an area where the temperature soars to well over 100\u00b0 F in the summer and falls under 0\u00b0 F in the winter. This means I need optics that can withstand hot and cold temperatures. If left in the car in the summer, an optic could easily reach 130\u00b0 F or more.<\/p>\n

I don\u2019t like to break optics just to be breaking them so I find tests that simulate the normal wear and tear I would put them through. The first thing I do before starting the tests is put the optic on a rifle and zero it at 50 or 100 yards. In this case, I did 100 yards with an AR-15 using a .55-grain bullet, since that is what they designed the Spitfire around.<\/p>\n

Freezing the Spitfire<\/h3>\n

For the first part of the FBSD test, I remove the optic and place it in the freezer overnight to make sure it gets good and frozen. Once I remove the optic, I place it back on the rifle and fire a few shots through it to see how it holds up. In this case, the Spitfire did just fine while it was cold. I will note that the optic had thawed greatly by the time I remounted it and made it out to the range.<\/p>\n

\"Vortex
When the Spitfire first came out of the freezer, frost covered the lens. [Photo: Jason Mosher]<\/figcaption><\/figure>It was still cold, but not frozen. If an optic is cold or hot, you never want to change its temperature drastically as this can cause the glass to break from thermal stress. The important thing is that the optic was still zeroed in when it returned to the outside temperature. While it was frozen, the condensation made it hard to see through the optic.<\/p>\n

Baking the Spitfire in the Oven<\/h3>\n

One of my favorite tests to perform is the oven test. I heat the oven up to 155\u00b0 F (unless the optic company lists a specific temperature rating on their optic), put the optic on a baking sheet, and place it in the oven. I use an infrared laser thermometer to make sure the outside temperature of the optic reaches 155\u00b0 F. Once it gets to that point, I leave the optic in for about 10 minutes before taking it back out. I then mount the optic back on the gun and head out to the range for another few shots.<\/p>\n

Soaking the Spitfire in Water<\/h3>\n

The Vortex box says the Spitfire has \u201cwaterproof performance.\u201d I\u2019m not sure what this means but I want to know if it can withstand some water submersion. I\u2019m not a Navy Seal so I don\u2019t plan on sneaking up out of the ocean with my rifle and optic. But it is possible for it to get dropped in water or rained on. I placed the Spitfire in a bowl and filled it with water until the optic was submerged.<\/p>\n

\"Water
I soaked the Spitfire in water for 10 minutes before taking it out. [Photo: Jason Mosher]<\/figcaption><\/figure>I used a 10-minute timer to count down before I removed it. If an optic can soak in water for 10 minutes and not have any water intrusion, it should hold up to everyday abuse. After taking it out of the water, I opened the turret covers and battery compartment to inspect for moisture. Everything was dry and I didn’t find any water behind the lens.<\/p>\n

Drop Testing the Spitfire<\/h3>\n

I know a lot of guys like to throw things off buildings or run over them with a dump truck just to see if they can break whatever they\u2019re testing. While that\u2019s fun and I enjoy watching the videos of this, I test the optic for a realistic impact that could happen when I\u2019m carrying it. I start out by dropping it on the ground outside several times before I move to harder surfaces.<\/p>\n

The concrete in my garage is smooth and doesn\u2019t scratch up the optic as much as the stuff outside so I go there for several drop tests. After dropping it several times from shoulder height, I remounted the Spitfire and checked it again. It was shooting about one inch to the left from where it had been, but that\u2019s not too bad. I gave the windage dial two clicks and had it back on center. For a direct drop on concrete, I can live with that.<\/p>\n

A Poor Man’s ACOG?<\/h2>\n

The MOA adjustments for the Spitfire are \u00bd per click. The optic has four holdover references at 100\/200, 300, 400, and 500 yards. The optic comes ready to mount on a Picatinny rail with a wrench for installation. The plastic covers can be removed easily if you want to take them off while using it. When compared to the ACOG, the Spitfire is slightly larger and bigger around in diameter.<\/p>\n

The eye relief is 2.8 inches, and the overall weight is just over 15 ounces. I have said this about other optics in the past and I will say it again. If I were planning to jump out of a plane in WWIII, I would take the ACOG with me. But for anything less, the Spitfire appears to be a durable, solid optic. We won\u2019t know how far its limits are until more testing and more research is done. I would venture to say, however, that this optic would hold up to just about any abuse that comes its way on our favorite rifle. The highlight, of course, is that it\u2019s affordable, making it hard to resist. And, it comes with Vortex\u2019s unlimited, unconditional lifetime warranty.<\/p>\n

\"Vortex
The Vortex Spitfire 3x prism scope comes with red and green illuminated etched reticles. [Photo: Jason Mosher]<\/figcaption><\/figure>This means you don\u2019t have to register it or be the original owner. If it\u2019s a Vortex product, they will make sure it stays working for you. I wouldn\u2019t recommend baking it in the oven or dropping it on purpose, because that will void the warranty, of course. But outside of deliberate damage, theft, or normal wear, they have you covered. I don\u2019t think I would call this a poor man’s ACOG. I would call it a tough optic that sells for a great price.
\n\t
\n
\n

Shop This Article<\/h2>\n <\/div>\n
\n