Defensive Firearm Modifications, My Philosophy

8312
6
Glock 17 with multiple modifications.

Gun modifications. They’re nothing new. Sometimes they’re made to improve a weapon’s performance. Sometimes it’s an aesthetic choice. Other times it’s more of a repair than an upgrade. Regardless, many people alter their “stock” firearms, even if it’s just adding accessories

The Backstory…

Recently I was tarred and feathered in the comments of my post on expanding the capacity of the S&W M&P Shield. Don’t worry, my feelings weren’t and aren’t hurt. That isn’t why I’m writing this. Instead, I want to clarify my position on gun modifications made to a defensive.

When it comes to writing, there can be issues in communication where the ideas in the author’s head don’t successfully translate to the reader. It only makes sense that this happens.

Think about it.

defensive firearm upgrades and alterations - screenshot of The Mag Life Blog post.

This post got some folks a bit worked up at the idea that I might suggest making modifications to your defensive handgun.

Ideas twice removed…

When I have ideas and thoughts, they are filtered through my collective experiences as I put them into words. My experiences color the meaning of those words.

Often, my editor reads those words, filters them through his life experiences. Those experiences are different than mine and the result is the words may have a slightly different meaning for him. He might make some changes to what I say, or how I say it in an attempt to communicate more clearly. My editor almost always improves my writing.

After the ed works his magic it is your turn. You aren’t an empty vessel. You as a reader have a wide base of experience that again, changes the meaning of what I wrote to your meaning. Your meaning is really the only one that matters, at least to you and it is my goal to try and communicate in a way that helps you to develop meaning that provides you with benefit.

Trijicon XDR HD sights and some sanding to relieve the texturing on the outboard side of the gun aren't the only modifications on my daily carry gun.

Trijicon XDR HD sights and some sanding to relieve the texturing on the outboard side of the gun aren’t the only mods on my daily carry gun.

At times it doesn’t work out the way we hope. My experiences, assumptions, omissions (I can’t write everything,) coupled with your filter add up to a misunderstanding.

We are all human and at times we disagree. And that is O.K.

That seems to be the case with the post on expanding the capacity of the Shield.

Why Modify Your Defensive Firearms?

In a perfect world, we wouldn’t need to modify our guns, especially our defensive guns. They should come from the factory perfect, right?

Unfortunately, it doesn’t really work that way.

Just like all of us have different life experiences, we also have different sized hands, varying ability to carry or conceal a handgun, and different end goals with our guns. I think we all have to admit that it is impossible to build the perfect handgun for everyone.

EDC MP 2.0 with Apex Duty kit.

My EDC M&P 2.0. That isn’t a factory trigger shoe, is it? The guts are an Apex Duty kit.

Even if there is a perfect gun for you, it doesn’t mean that you can own it. At times there are shortages due to events outside of our control, (like spring 2020). Other folks might live in a political climate that prevents them from owning “the perfect gun”.

Even simpler, it might be economically more reasonable to make a small change to a gun you already have instead of footing the bill for a new gun. And all the accessories. That still won’t be perfect…

Heck, some people might just enjoy tinkering with their guns.

It is in this spirit that I wrote the post about expanding the capacity of your Shield.

The Worries

When you decide to modify a gun there are some things to worry about.

  • Does the gun function reliably?
  • Have you created any safety concerns with your modifications?
  • What about legal worries? Will your modified gun get you in hot water if you have to use it, or even just for owning it.

These are all things to think about when you try to decide whether or not you should modify your defensive firearms. These issues (and many more) are probably what got folks worked up with the article. Some were also a bit miffed at why someone wouldn’t just buy a P365 with its hi-cap mags. Or even better a Hellcat that has a 13+1 capacity. California is one pretty big reason.

Yup, there are worries about making modifications to your defensive firearms, even simple ones like swapping out the magazine springs. There are just as many arguments that might support making some modifications.

I built this gun from parts. I didn't modify it, I built it to my specs. Does that disqualify it from defensive use? I don't think so. I recently had a factory professional-grade rifle go down hard in a class with less than 500 rounds through it. This gun took its place without skipping a beat.

I built this gun from parts. I didn’t modify it, I built it to my specs. Does that disqualify it from defensive use? I don’t think so. I recently had a factory professional-grade rifle go down hard in a class with less than 500 rounds through it. This gun took its place without skipping a beat.

As is usual, I don’t know the answer to the question that is really being asked.

Should You Modify Your Defensive Guns?

I don’t know the answer because there is no single answer. For some folks, the answer is a definite no. For others, it might be a maybe. Still, others would say it’s a resounding “hell yeah!”

Only you can find the right answer to the question.

You need to consider the worries I pointed out above, factor in the difficulty of doing the mod along with your capability to do it, and compensate for how important the modification is. I also think it makes sense to consider your ability to articulate the reason why you made the modification.

You’ve got to make your own decision on this. Go about making that decision in an educated manner.

 

Up next: Beyond Dryfire…beat the quarantine blues. 

What Should You Do if You Decide to DIY?

First off, you should remember that you — and only you — are responsible for the consequences of your decisions.

Second, you are asking for trouble if you don’t educate yourself. There are tons of resources available for you to learn what mods are appropriate, within your ability level, and how to complete them successfully. Spend time learning before you dive in. For me, learning is half the reason to mod…

Finally, when you decide to mod, focus on attention to detail and test, test, test.

Glock 17 with multiple "upgrades".

There is not much stock in this chopped GLOCK 17. It takes 19 mags, has an aftermarket slide stop lever, custom sights, a minus connector, and a NY1 trigger spring. Despite those gun modifications I’m not dead or in jail yet.

When I make a modification to a defensive gun, it gets a minimum of 200 rounds of target ammo and 50 rounds of defensive ammo before I call it good.

If you arent ready to commit to testing, you aren’t ready to mod.

Gun Modifications: Final Thoughts

As the text and images from this post drift through all of our collective filters there is bound to be some miscommunication. I encourage you to share your thoughts and ideas in the comments where we can have a kind, reasonable, and educational discussion about making gun modifications to a defensive pistol.

What mods have you made to your guns?

What mods did you decide against?

Are there any modifications that you left to a real gunsmith?

What is the worst trouble you have ever gotten into with your Dremel?

I look forward to the discussion below.

 

Pistol mags: you need some? We have ’em for every conceivable handgun make and model.

Range Gear: some things make the trip easier, more effective, and more fun.

Paul Carlson: read more of his articles.

Paul Carlson, owner of Safety Solutions Academy, is a Professional Defensive Shooting Instructor.  He has spent the past decade and a half studying how humans can perform more efficiently in violent confrontations and honing his skills as an instructor both in the classroom and on the range.

Through Safety Solutions Academy, Paul teaches a variety of Critical Defensive Skills courses in more than a dozen states annually.  Courses range from Concealed Carry Classes to Advanced Critical Defensive Handgun Courses and include instruction for the defensive use of handguns, rifles and shotguns.  Safety Solutions Academy regularly hosts other industry leading experts as guest instructors to make sure that SSA’s students have the opportunity for quality instruction across a broad range of Critical Defensive disciplines.

  • Jonathan Miller

    Mods like an aftermarket slide stop, trigger springs and sights are child’s play. No one should be afraid to make those simple changes. Only when you get into modifying the barrel or changing the action should you have some gunsmithing skills. Anyone can literally assemble an 80% lower into a handgun with simple handtools.

  • Snake Pleskin

    Some mods are mechanical and some are ergonomic and some are just to look cool. Mechanical mods had better be proven, vetted and reliable 110% of the time! Ergonomic mods are all about the individual. What fits and feels good to you may not work for someone else. Mods that just look cool, ….grow up and save your money for “real training” and ammo.

  • Syllogist

    I’d hate to find myself in court having defensively used a pistol with a Killer barrel and R.I.P. ammo.

  • Jim Constantine

    If you have perceived problems with the sights then change them. Very easy modification.

  • Roy Clark

    Marty Hayes, an attorney who has testified in many self-defense cases, has an opinion about self-defense firearm modifications.
    Goto: armedcitizensnetwork.org
    Click on “Home”
    Click on “Journal”
    Scroll list on lower right hand screen to bottom
    Click on “Gun Modifications”
    Also check out Marty’s background on the site

  • http://www.spwaw.com/ Bernhard Behling

    My mods to any firearm always start with a very careful consideration of how I’d explain why I made them to a jury and how it’d sound to a jury unfamiliar with guns. If I can’t explain it in a way that doesn’t make me sound like some crazed killer then it doesn’t get made.

    Why did I modify the sights on my pistol? To help ensure that I only hit what I’m aiming at and reduce the danger to innocent bystanders. That’s an easy, reasonable justification. Trying to explain the reason I had “Kill ’em all and let God sort ’em out” engraved on the slide wouldn’t be so easy.