Truth be told, I was curious about learning my way around red dots even though I would be hard-pressed to give up iron sights. Red-dot compatible pistols run the gamut in size, quality, and price. Red dots are a natural addition to competition 2011s but such guns aren’t practical nor priced accordingly for most people to carry or buy.

Luckily there are plenty of polymer-framed carry and duty pistols out there that are now red-dot ready. I briefly considered the Taurus G3 and Sig 365-380, but the quality of the former was suspect and the size of the latter was a bit too small. The Beretta APX and Glock 48 are quality, affordable, moderately priced options, but I ultimately decided on the Walther PDP F.

Walther PDP F Features

Operationally, the Walther PDP F series is a conventional striker-fired polymer-framed pistol. Like most of its competitors, the PDP F feeds from a conventional double-stack magazine and uses a Picatinny rail over the dustcover for mounting a flashlight. At the time of this writing, it is only available in 9mm Luger but comes with either a 3.5-inch or 4-inch barrel. My particular example has the former barrel length.

The PDP F incorporated a number of improvements that shooters have come to expect including a squared-off trigger guard and ambidextrous slide release, as well as forward and rearward cocking serrations on the slide. On other pistols, these appointments seem like cheap afterthoughts but Walther took greater care. The square and stippling on the trigger guard are more aggressive. The slide release is a single-milled piece of steel instead of bent sheet metal. The slide serrations, what Walther calls their Superterrain serrations, are few, but deep and angular.

If you are used to a straight grip angle of a Glock, the grip of the Walther will look a bit strange, tapering up to the beavertail while flaring out on both sides at the butt. It does lack the backstrap bulge seen in other Walther pistols, however. The front of the butt takes on a C-shape, not unlike some old American flintlocks, anchoring the pinky in place. The grip stippling lacks the harsh sandpaper feel of the S&W M&P but is clingier than Glock dots.

The magazine release button is interchangeable to either the left or right side to pair the ambidextrous slide stop. The PDP’s trigger mimics Glock’s safe-action trigger, with an inner shoe that must be depressed in order for the pistol to fire. But that is where the similarity ends. Their Performance Duty Trigger, as Walther calls it, broke clean on my Lyman trigger scale at 4 lbs. 6 oz. From a resting position, there is only a few millimeters of travel before the trigger hits a wall and then breaks. The trigger return spring is stout and a slight let-off brings the trigger back to a short, brisk reset.

The PDP is designed with a micro red-dot optic in mind, but it does not come with an optics plate. Instead, there is a voucher with the factory box to obtain the appropriate optics plate. Given how many optics are on the market, this might be better than sending optics plates that will go into the trash bin. Straight out of the box, the Walther wears a set of traditional three-dot iron sights.

The PDP F-Series disassembles like most striker-fired pistols available today. With the pistol dry-fired, all you have to do is draw the slide back a touch, push down the takedown lever inside the trigger guard, and draw the slide off the frame. Internally, the PDP is a typical Browning-style locked breech design. This 3.5-inch model uses a dual recoil spring, while the 4-inch uses only one. Both are captive by a polymer guide rod.

Walther designed the PDP to be modular, allowing you to change slides, barrels, and grip frames at will. The compact and full-sized barrels and slides can be intermixed as their four and five-inch barreled models use the same recoil spring. However, the 3.5-inch model will need a new recoil spring to upgrade in barrel length. In any event, the compact PDP F-Series are compatible with eighteen-shot full-sized PDP magazines as well as the two factory fifteen-shot magazines that come with the pistol.

To round out the package, the factory box contains the requisite owner’s manual, lock, one grip adapter, and a magazine loader.

On The Range

After a quick cleaning, I put the Walther PDP F-Series through a few range sessions with 300 rounds downrange. Although this is not a high volume of shooting, I was able to shoot some drills and do some accuracy testing to render a holistic judgment.

I started with a magazine loaded with CCI Blaser 115 grain FMJ target loads and bullseye targets at ten yards to see where the sights were hitting. Out of the box, the sights were zeroed perfectly. I could reliably put five rounds into a four-inch pattern at that distance before I warmed up to the trigger.

I then set up some bullseye targets at fifteen yards and shot from a rest to see how well the pistol shot and cycled with different loads including:

Hornady Critical Defense Lite 100 grain FTX                     3.0 inch

Remington HTP 115 grain JHP                                          4.4 inch

Sig Sauer V-Crown 124 grain JHP                                     3.25 inch

Sig Sauer V-Crown 147 grain JHP                                     3.4 inch

CCI Blaser 115 grain FMJ                                                   4.2 inch

TulAmmo 115 grain FMJ steel-case                                  4.8 inch

Of this limited selection, the Hornady Critical Defense Lite gave the best group and, surprisingly it shot to the point of aim despite being light-for-caliber. It also had the least amount of felt recoil, although none of these loads were unpleasant.

Off the bench, I took my remaining ammunition, mostly CCI and TulAmmo 115 grainers, and shot a 1/2 D28 steel target at 30 yards. As long as I was able to get a gross alignment of the sights and a proper trigger press, hitting was no problem. The addition of a red dot would only make quick distance shooting easier; but as it comes out of the box, the PDP F does quite well.

I ran the PDP F as set up for a right-handed shooter out of the box, even though I am a lefty. I didn’t find anything wanting when operating and shooting the pistol. The straighter grip angle of the PDP made the pistol’s sights line up on target when aiming offhand, but the contours of the grip itself were hand-filling and there was no empty space for the pistol to recoil into.

The reload was more of a mixed bag. I found it just as easy to hit the magazine release button with my left index finger, rather than change the button to the other side. The magazines fly free, even when empty and I didn’t have to reach up with my other hand to yank magazines out of the magazine well.  On some smaller gripped guns, the meat of my hand would stop magazines from clearing easily. The Walther PDP F-Series has no problem here.

The slide stop is big and easy to hit to chamber a new round from a fresh magazine. But when firing the pistol, my bigger thumbs tended to ride over the top of the slide stop and keep the pistol from locking open on the last shot. This isn’t the fault of the pistol but my own training. I shoot mostly revolvers and I use a thumbs-over grip. Most folks aren’t going to have this problem. In the event of a click instead of a bang, I knew I was out and changing magazines was a breeze.

Racking the slide didn’t take much effort. Walther does claim that the PDP F has an easier-to-rack slide, but I believe this is due mostly to the aggressive serrations that give plenty of purchase, rather than a significant reduction in spring weight.

Parting Shots

Although my meaty hands sometimes got in the way of flawless performance, I left the range happy with the Walther PDP F-Series. There were no failures to fire or to feed and it digested everything from steel-case range trash to premium hollow-point loads. Even without a red dot, the PDP is an excellent shooter. The iron sights are zeroed and squared away. The grip is molded for a commanding, but fatiguing hold. The buttons and switches can be tweaked for wrong-handed people like me but can be left alone for the other 90% of you. The factory trigger alone is probably worth the price of admission.

The PDP and its trimmer F-Series line have a long way to go to commanding the staying power of its predecessor, the PPQ, but it deserves a long, hard look if you are in the market for a personal defense or duty pistol with modern appointments that can make a good shooter even better.

The post The Walther PDP F-Series: A Fighting Pistol for Small Hands? appeared first on The Mag Life.

Specifications for the pistols

• Weight w/ 18+2 Mag: 1.74lb
• Capacity: 18/20+1 rounds
• Cartridge: 9mm Luger
• Action Type: Semi-Automatic
• Frame Material: Synthetic
• Overall Length: 7.56”
• Barrel Length: 4.46”

The pistol’s design, either Days or Nights option, will have a color-matching flared magwell and secondary magazine with a +2 round extension, for an overall capacity of 18 rounds in the first magazine and 20 in the extended mag. With the 18-round magazine, the pistol weighs just under 1.75 pounds.

The Miami Days and Nights 9mm pistol from Canik has an overall length of 7.56” and boasts a 4.46” long barrel. It has a white dot rear sight with a front sight post and the ready-out-of-the-box trigger that Canik is so well known for. The slide also features an angled rear sight edge for emergency one-handed operation.

The 9mm pistol package is available, in either Days or Nights color scheme, for an MSRP of $769.99.

The post Canik Firearm’s Miami Days and Miami Nights Limited Edition Pistols appeared first on The Mag Life.

• Frame and Barrel: CNC Machined Stainless Steel for precision manufacturing
• Action: Single Action Folding Revolver
• Barrel Length: .75″
• Grip: Large Polymer for easy handling
• Weight: 9 Ounces, Loaded
• Dimensions: 2.125” x 3.75” x .75” Folded

The Switch-Gun is small, at 2.125” by 3.75” by .75” when folded. The revolver is only slightly larger than smartphones but weighing less, it won’t take up much space within a pocket or carry bag.

The Standard Manufacturing Switch-Gun is durable and made from CNC machined stainless steel for the frame and the barrel so function and reliability are not a concern for end-users. The folding revolver has a single action mechanism, so there is an initial cocking of the revolver and a 5-round cylinder. The cylinder can be swapped out from .22LR or .22WMR easily and quickly.

The Standard Manufacturing Switch-Gun functions like a standard .22LR revolver and is ready to be used at the push of the button that releases the folded gun, opening it. Currently, the only states the Standard Manufacturing Switch-Gun is NOT legal in are California, Massachusetts, and Maryland. The Switch-Gun in .22LR or .22WRM has an MSRP of $449.

The post Standard Manufacturing Switch-Gun in .22LR appeared first on The Mag Life.

According to the manufacturer, this 410 Bore model is their shotgun addition to the Huckleberry line. It’s meant for lever action lovers that prefer a modern twist with finishes and features. The Huckleberry sports a tactically-appealing skeletonized stock, MLOK/Picatinny compatible forend, and high-grade aluminum receiver. GForce Arms Lifetime Limited Warranty does apply to this gun.

This is a gun created to take the lever action shotgun into the modern era. From its relatively light recoil, smooth cycling, and fast handling, it’s the ideal match for serious shooters. It doesn’t matter if you’re brand new to the world of levers or have admired them for years; the Huckleberry is a fun, useful firearm worth considering adding to your collection.

Features of the Huckleberry in 410 Bore include:

• 20-inch or 24-inch barrel length. The shorter length serves as a better brush or truck gun while a longer barrel can slightly increase velocity and accuracy.
• 7-round or 9-round capacity depending on barrel length.
• High-visibility front sight for rapid target acquisition and to draw the eye.
• The open rear sight helps the eye focus on the front sight.
• QD loop sling mounts facilitate easy attachment of a sling.
• Picatinny rail atop the handguard at the rear makes it simple to add an optic or red dot sight to the gun.
• The Picatinny rail beneath the handguard at the muzzle end is ideal for lights and lasers.
• M-LOK compatible forend is great for aftermarket accessories like lights and lasers.
• The gun takes 2.5-inch 410 Bore shotshells.
• The skeletonized stock makes it lighter weight overall.
• Easy to operate loops on lever.
• The overall length of 39 inches or 43 inches depending on the barrel length.
• An aluminum shotshell holder is on the side of the stock for extra storage of spare ammunition.
• The Huckleberry weighs either 7 pounds 9 ounces or 8 pounds 1 ounce depending on barrel length.
• It is side-loading and ejecting lever-action, meaning the loading gate is in the right-hand side of the receiver.

The Huckleberry 410 Bore lever-action is a great option for target shooting and hunting small predators and varmints. It’s even a solid choice for youth shooters thanks to the small amount of felt recoil and muzzle rise. Even the action of manipulating the lever can be easier for small hands than working a pump-action shotgun.

MSRP for the GForce Arms Huckleberry 410 Bore is not known at this time.

The post GForce Arms Huckleberry: Lever-Action Shotgun appeared first on The Mag Life.

ET Arms, formerly known as PlumCrazy, has a reputation for putting thought and planning into their firearms. From its buffer tube to its muzzle brake, the PlumCrazy Gen 2 AR-15 pistol is a great example of that dedication to quality. This pistol has a polymer receiver to lighten the overall weight while simultaneously providing a durable foundation for the platform.

The pistol is chambered in 5.56 NATO and comes standard with a 7.5-inch barrel with a 1-in-8 twist rate. A 7-inch M-LOK compatible handguard can be used for whatever aftermarket accessories the user desires. The upper and lower receivers have metal overmold inserts and are patented designs from the manufacturer. According to the gun maker, this is one of the strongest AR pistols on the market. Perhaps the most interesting feature is the company’s Saf-T-First Trigger, which enables the safety to function even with an empty chamber. Each gun ships with a 30-round magazine.

Features of the pistol:

• The ET Arms Saf-T-First trigger makes it possible to engage the safety without chambering a round.
• Polymer receivers reduce the overall weight of the gun.
• The receivers have metal overmold inserts for superior durability and resistance to wear and tear.
• The 7-inch M-LOK compatible handguard allows for the easy addition of aftermarket accessories such as lights and lasers.
• 7.5-inch barrel length improves maneuverability in close quarters.
• 1-in-8 twist rate stabilizes a range of bullet weights.
• A 30-round magazine ships with the pistol.
• A Picatinny rail sits over the upper receiver for easy mounting of optics.
• The forward section of the Picatinny rail makes it possible to mount iron sights if so desired.
• A brass deflector comes standard, which helps shield shooters from ejecting brass.
• The forward assist on the upper receiver helps get the gun in battery if a round doesn’t load fully.
• Tension screws hold the handguard in place, and can be easily tightened by the user if need be.
• The muzzle brake reduces muzzle rise and mitigates felt recoil.

This AR pistol is a smart choice for gun owners looking for a firearm small enough to fit into a backpack or storage space in a vehicle, but larger than a handgun. Thanks to its polymer construction it weighs less than many similar firearms, so it won’t add unnecessary bulk to your load. And with its 5.56 NATO chambering, this pistol is capable of handling all manner of defensive situations.

MSRP for the ET Arms PlumCrazy Gen 2 AR-15 platform pistol is set at $549.99.

The post ET Arms PlumCrazy Gen 2: They’re Back! appeared first on The Mag Life.

Sig Sauer provides details of the M400 SDI X-Series:

The SIG SAUER M400 SDI XSERIES packs a rich set of features and upgrades into the M400 platform delivering an advanced performance rifle right out of the box. The M400 XSERIES lower features fully ambidextrous controls, including bolt catch & release, selector switch, charging handle and mag release. Also unique to the XSERIES is a precision machined lightning cut upper and lower with a handguard clamp system designed to minimize deflection when using mounted accessories. Other features include a hybrid flash hider/compensator, 2-Stage Matchlite Trigger and Magpul SL Telescoping Stock.

Regarding the M400 Tread Predator 2, Sig states:

The SIG SAUER M400 TREAD Predator has been specifically built to give Varmint and Predator hunters the features they need and want to be successful in the field.  The custom designed flat bottomed M-lok handguard makes it easy to mount to a bipod or setup on a set of shooting sticks.  The Cerakote Jungle finish provides concealment and protection while the stainless steel 16” barrel delivers maximum accuracy and comes threaded for easy suppressor mounting.  New for 2022 features include the addition of Magpuls PRS Lite Stock, 2-Stage Matchlite Duo Trigger and PRS Style grip.

Features of both the Tread Predator 2 and the SDI X-Series include:

• M-LOK handguard with lightening cuts to reduce weight, available in 13” and 15” lengths
• 3 chamber compensator
• Ambidextrous charging handle made of aircraft grade aluminum and a dual roll pin design
• ROMEO5 optic featuring a 2MOA dot with ten illumination settings, MOTAC, and 50k battery life
• Flip-up front and rear iron sights that are easy to install, adjustable, and deploy quickly
• M-LOK front sight adapter with co-witness height made of lightweight aluminum
• Multiple configurations of M-LOK grip kits made of high-strength polymer
• Factory upgraded flat blade, single-stage trigger.

These rifles offer the best of the worlds when it comes to versatility and task-specific performance. The SDI X-Series is great for close-quarters and other defensive work while also being good for range work; the Tread Predator 2 is excellent for varmint hunting but also a solid all-purpose gun. These are nice options for a broad variety of uses.

MSRP for the M400 SDI X-Series is unknown but dealers have it listed at $1363.99. MSRP is also unknown for the Tread Predator 2, but it’s shown at $1999.99 at dealers.

The post Sig Sauer M400 SDI and Tread: Superior Shootability appeared first on The Mag Life.

Nemo Arms provides details of the rifle:

The OMEN Watchman is the worlds first viable, reliable, and accurate 300 WM semi-auto platform. Built for ultra long-range applications, the Watchman makes precision shooting at extended ranges a breeze. At the Watchman’s core is a 24” Proof Research carbon fiber barrel, which is chambered in NEMO’s facility to ensure optimal accuracy performance. Extremely low recoil comes thanks to our own patented recoil reduction system which you won’t find anywhere else. This, combined with comfortable ergonomics gives the shooter confidence to shoot better than ever before. You must shoot it to believe it. The Watchman provides and exceptional shooting experience, allowing the shooter to perform at levels never before imagined.

Features of the rifle include:

• NEMO upper and lower receiver set billet 7076-T6 Hard Anodize tiger stripe
• 15” 6061 M-LOK modular rail 1.83” internal diameter steel QD mounts rotation limited
• Lightweight heat-dissipating barrel nut 7075-T6
• 7075-T6 7 rifle length “Carrier Cradle” anti-tilt receiver extension Nickel Boron coated
• Tuned steel-faced buffer system
• Chrome silicon recoil spring
• PROOF Research 24” Carbon fiber wrapped barrel 1:8 twist .300 win-mag chamber
• NEMO dual chamber compact muzzle brake 6AL-4V titanium
• 4-position adjustable gas system for suppressed and un-suppressed use
• Severe duty threaded stainless gas tube extended length gas system
• PATENTED recoil reduction carrier 8620 heat treated Nickel Boron coated
• High-Pressure bolt 9310 heat-treated Cryo’d shot peened MPI Nickel Boron coated
• Tool steel extractor heat treated IONBOND coated
• Titanium through drilled takedown and pivot pins
• Ambidextrous safety selector
• Tool steel side charging handle Ionbond coated
• Geissele Super semi-automatic enhanced (SSA-E) two-stage trigger First 2.3lbs Second 1.2lbs
• MAGPUL MIAD grip
• MAGPUL PRS adjustable rifle stock
• NEMO 14-round magazine with aluminum follower

Specifications:

• Caliber: 300 Win Mag
• Barrel Length: 24 inches
• Overall Length: 45.5 inches
• Weight: 10.2 pounds, empty
• Capacity: 10 rounds or 14 rounds depending on the magazine
• Stock: Magpul PRS, adjustable
• Pistol grip: Miad
• Bolt: 9310 heat-treated Cryo’d shot peened MPI
• Trigger: Geissele Super semi-automatic enhanced (SSA-E) two-stage trigger
• Barrel: 24-inch Proof carbon fiber with a 1:8 twist rate
• Handguard: 15-inch 6061 M-LOK modular rail

It’s nice to see a semi-auto in this caliber on the market, and Nemo has a solid reputation to back its quality and performance. Reports are this is a 1 MOA rifle as long as the shooter brings the skills to the shooting bench.

MSRP for the Nemo OMEN Watchman in 300 Win Mag is $6200.00.

The post Nemo Omen: 300 Win Mag AR (Yes, Really) appeared first on The Mag Life.

Beretta provides details of the shotgun:

The A400 Upland in 28 gauge features the reliability of the popular A400 series with an ergonomic forend, a nickel-plated receiver, and the ability to shoot 3” magnum shells for those hunters who want to transition from different game birds without sacrificing reliable cycling.

With a slim new design, the newly designed pistol grip and forend improve comfort and enhance the overall look.

An exquisitely engraved styling pattern completes the nickel-plated receiver.

Whether you are looking to hunt with the lightest of dove or the heaviest of waterfowl loads, the new A400 Upland in 28 gauge allows the hunter to shoot with 3” magnum shotshells while still maintaining the reliable cycling that the A400 series is known for.

Keeping this shotgun as good as new after a long day on the field or at the range is quick and easy: you can field-strip the A400 Upland without any tools, and it comes apart in only five components that are a snap to reassemble.

This is a solid choice for bird hunters after upland game birds such as pheasants, quail, and grouse. The 28 gauge chambering is soft-shooting and small enough to minimize damage to usable meat. It’s an ideal gauge for upland birds but also an excellent option for the range and teaching new shooters who need less felt recoil.

Swing swivels are included with the A400 Upland, so it’s easy to add a sling to this shotgun, making it simpler to carry in the field. Beretta also designed the bolt handle and release in an extended style to facilitate manipulating even while wearing gloves. It’s made to be naturally pointable and to mount to the user’s shoulder smoothly. Overall, it appears to be an ideal hunting shotgun.

Features of the A400 Upland include:

• Ergonomic Forend
• Nickel-Plated Receiver
• Now Offered in 28 Gauge
• Swing Swivels Included
• Extended Bolt Handle & Release
• New Receiver Shape

Specifications

• Manufacturer: Beretta
• Model: A400 Upland
• Gauge: 28 gauge
• Barrel length: 28 inches
• Choke: 3 OPHC Flush Mounted Chokes
• Chamber: 3 inches

MSRP for the Beretta A400 Upland in 28 gauge is set at $1829.00.

The post Beretta A400 Upland: 28 Gauge Goodness appeared first on The Mag Life.

BCA’s .17 HMR AR-15 is perfect for beginner and veteran shooters alike, combining the low cost and recoil of rimfire ammunition with the superior ballistics and accuracy of the 17HMR. Each complete upper will ship with a 10-round magazine and comes with a lightweight buffer and spring to adapt AR-15 lowers.

The options for the 17HMR include a 16” Parkerized barrel setup, a 16” Black Nitride barrel setup, or a 20” 416R Stainless Steel setup. These are available as complete rifles or as complete uppers.

Bear Creek Arsenal develops and manufactures firearms and shooting products for a multitude of customers throughout the United States with one primary focus: providing the highest quality of firearms for the everyday American.

The BCA AR-15 .17 HMR rifle has a 16″ heavy barrel with a Parkerized or black nitride finish and features a 1:9 twist rate. It includes the new 15″ MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a right-side charging handle (Gen 2, Patent Pending). The complete rifle comes with the BCA mil-spec AR-15 lower and includes one 10-round Black Dog mag.

Specs for 16” Rifles

• Weight: 6.75 lbs
• Barrel Length: 16”
• Profile: Heavy Barrel
• Twist: 1:9
• Finish: Parkerized or Black Nitride
• Material: 4150 Chrome Moly Vanadium
• Thread Pitch: 1/2×28
• Caliber: .17HMR
• Gas System: Blow-Back
• Charging Style: Right Side Charging
• Platform: AR-15

Likewise, the BCA AR-15 complete .17 HMR rifle has a 20″ heavy barrel with a stainless steel finish and features a 1:9 twist rate. It includes the new 15″ MLOK rail, an M4 flat-top billet upper receiver, a BCA bolt carrier group, a flash hider, and a right side charging handle (Gen 2, Patent Pending), and the BCA mil-spec AR-15 lower and includes a 10-round Black Dog mag.

Specs for 20” Rifles

• Weight: 7.5 lbs
• Barrel Length: 20”
• Profile: Heavy Barrel
• Twist: 1:9
• Finish: Stainless
• Material: 416R Stainless Steel
• Thread Pitch: 1/2×28
• Caliber: .17HMR
• Gas System: Blow-Back
• Charging Style: Right Side Charging
• Platform: AR-15

Bear Creek Arsenal manufactures all AR-15 rifles, complete upper assemblies, barrels, bolt carrier groups (BCG), and components in-house here in Sanford, NC. If you choose an American-made AR-15 complete upper assembly from Bear Creek Arsenal, you’ll get one designed for high accuracy and backed by a lifetime warranty. The 16” Parkerized barrel complete rifle has an MSRP of $732.99, the 16” Black Nitride complete rifle goes for $752.99, and the 20” 416R Stainless steel rifle is $772.99.

The post 17HMR AR-15 Rifles from Bear Creek Aresenal appeared first on The Mag Life.

What the EMG-02 is, is a look at the possible future of computers and electronics in firearms. The EMG-02 has eight computer optically controlled stages and is made to fire ferromagnetic dowel pins between 6 and 8mm in diameter and 19 and 22mm in length.

Arcflash Labs released the following details of their EMG-02 coil gun:

Arcflash Labs, LLC, announces another milestone in the development of their handheld electromagnetic accelerators – an improved model with a more practical design, higher rate of fire and refined features, the EMG-02. The device is capable of delivering 266 Joules per second of energy on target (15 ft-lbs at 800 rds/min), doubling the output power of their last product the GR-1 “ANVIL” (100 Joules per second). This higher rate of fire allows for the EMG-02 to fill more practical applications in today’s market.

The EMG-02 delivers similar muzzle energy to an air rifle, but with a much higher rate of fire. A high end pneumatic air rifle might be able to fire 20-50 shots before needing to re-pressurize. The EMG-02 can fire full auto, 18 rounds per magazine, and each battery stores enough charge for 300+ shots. No compressor required. The batteries can even be charged using inexpensive solar panels.

The key advantage of a Gauss Rifle over a firearm or air rifle is its versatility and independence – you can fire any magnetic projectile that fits inside the barrel, even ammunition fashioned from ordinary steel bolts. Gauss Rifles eliminate the user’s reliance on mass produced ammunition, expensive air compressors, or complex/ dangerous reloading equipment. They also have very low recoil, allowing for high accuracy at short range (20-60 feet).

David Wirth, a co-founder of Arcflash Labs, told the media “with this new product, we’re hoping to shake up a market traditionally dominated by air rifles.” The other co-founder of Arcflash Labs, Jason Murray, stated: “It’s the best design we’ve come up with yet.”

Check out this video of the EMG-02:

Interested? Arcflash shared some details of the EMG-02:

NOW AVAILABLE FOR PRE-ORDER – Batch 1 ETA 15 December 2022
Lead time: approx. 4-6 months
For more information, please visit our new shipping table.

ALPHA PRODUCTION VERSION
– Full liability waiver *may* be required of end user prior to shipment
– Unit ships with one (1) EMG-02 gun, one (1) hard carrying case, one (1) battery pack, one (1) battery charger, one (1) 15-round magazine (MG15A), as well as ten (10) 51634 armatures.

MSRP for the Arcflash Labs EMG-02 is currently listed as $2515.50.

What do you guys think? Would you want a coil gun? Tell us what you think, and what you’d like to see from guns down the road, in the comments section.

Coil Gun Specifications

Accelerator Specifications

Physical Dimensions

The post Arcflash EMG-02 — Coil Gun Coolness appeared first on The Mag Life.