AK 47 Magazine Muster: for your Kalash Collection

If you’re a Kalashnikov owner, you know you can buy AK 47 magazines (well, AKM magazines) from all over the world. There are Russian AK mags of course, but also Bulgarian, Romanian, Serbian, Chinese, American…they’re being manufactured on at least five continents. So how do you tell ’em apart? And how do you determine what the best AK mags are? 

Best AK mags: big and little AK magazine options

Sure, the “slab side” mags are clearly different from the ribbed versions, and both are distinctly different from the later aluminum “waffle mags”. The various incarnations of Bakelite magazine (which weren’t Bakelite) are clearly dissimilar from modern polymer mags, but within those groups are versions from different manufacturers and of varying reliability.

But how do you determine which AK magazine to buy?

Easy. We’ll tell ya.

You needn’t have to distinguish between the little Izevshk arrow-in-a-triangle, the star stamps of Tula, the triangle-66 of Factory 626, or for that matter Clegane Armament’s three black dogs. GunMag Warehouse carries just about every kind of AKM magazine (i.e. AK 47 magazine) in production. We’ll lay out some suggestions for you.

AK 47 history: diagram from an unclassified CIA report
The Avtomat Kalashnikova (Автома́т Кала́шникова or AK) is arguably the most recognizable firearms ever. But that wasn’t always the case – as you can see in this memory sketch of an AK47 sighting by a CIA agent. This was the first time anyone in the West knew of what was to become the seemingly ubiquitous weapon.

Why would we do that for you?

Because…capitalism. And because our own experience, and the feedback of our customers, give us a pretty good idea of what works, what’s worth the money, and what should only be used for training or field-expedient cudgel.

Best AK Mags

11 AK 47 Magazine Picks: an AK Mag Miscellany

The following are some of our favorite AK 47 magazine picks (averaged across more than one member of our writing team). Your mileage may vary.

Bulgarian AK Mags

These Bulgarian AK mags are hands down some of the best AK magazines we’ve used to date, and we’re not just talking about steel Bulgi AK mags. Especially the ones with the reinforced steel lugs (q.v.).

More on that below. 

1. Bulgarian AK Mag | 7.62×39 Steel Lug Reinforced Polymer (30 rounds)

Bulgarian Reinforced steel lug polymer magazine
This is Shaw’s favorite AK mag, though he uses many different kinds both when he teaches and when he’s learning.

2. Bulgarian AK Mag | 7.62×39 (30 rounds)

Bulgarian AK magazine (30 round)
This Bulgarian AK magazine hearkens back to the early ComBloc ribbed mags but is built with modern materials and modern machines in a modern facility.

3. Bulgarian AK Mag | 7.62×39 Steel Lined Polymer (30 rounds)

Bulgarian AK magazines
Bulgarian AK mags are made in…wait for it…Bulgaria. And these kinda have that old Bakelite look, if you want to roll retro.

Bulgarian AK magazine

AK mags underwater
AK mags underwater? Sure. Just be aware your maximum effective range will be reduced to just about two meters.


XTech Tactical

Xtech has several different kinds of AK mags in sort of a tiered quality/price structure. They’re all good magazines, from what we’ve seen, but the “MAG47 MIL AK-47” is built more ruggedly than the standard XTech MAG47, and even the 10/30 magazine (for California use) is beefy. They also have a BHO (Bolt Hold Open) option they describe as the “…strongest AK47 magazine to ever be made in the USA.”  That’s a pretty bold statement, but XTech makes some pretty damn good mags, so…

4. XTech MAG47 MIL AK-47 | 7.62×39 (30 rounds)

XTech MAG47 steel AK magazine
These mags are the ones TML editor David Reeder uses the most with his AK, though that supply is leavened by a scattering of PMAGs for the AK (q.v.).

5. XTech MAG47 AK-47 | 7.62×39 (30 rounds)

XTech MAG47

6. XTech MAG47 | 7.62×39 (10/30 rounds)

XTech Tactical - XTech MAG47
The XTech Tactical “XTech Mag47” is an excellent polymer AK magazine option. They’re from Phoenix, not Bulgaria.

• Magpul

The term Magpul is pretty much synonymous with rifle magazines. It just has fewer syllables. Although rightly known for their AR 15 magazine selection, Magpul manufactures some excellent polymer AK mags. To wit:

7. Magpul AK Mags – PMAG AK/AKM Gen M3 7.62×39 (30 rounds)

Magpul AK mags
Magpul AK mags: good stuff, Maynard. It’s very hard to go wrong with PMAGs of any kind. Your mileage may vary, but there’s a reason Magpul is borderline ubiquitous.
Magpul AK Mags with Ken Hackathorn
The significance (and magnificence) of this picture cannot be overstated.
AK 47 magazine in Finland
AK 47 magazine in Finland (not from Finland). AK Mags are used by Finnish Defence Forces.
AK 47 magazine underwater in slow motion
It’s a little known fact that the Kalash is the favored weapon of the Kuo-Toa, most Rusalki, numerous Murloc clans, some Quarren, and the occasional Y’ha-nthlei militia member. Sahuagin, interestingly, prefer tactical lever guns.


8. US PALM | AK Magazine 7.62×39 (30 rounds)

US PALM AK Magazine

US PALM was one of the earliest US-built polymer AK magazine options. They were unavailable for a couple of years but returned in 2019.

• ProMag

9. ProMag Magazines: AK-47 7.62×39 Polymer Magazine (30 rounds)

ProMag AK Magazine

ProMag AK magazines are inexpensive and noticeably scrawnier than some of their more robust cousins (like XTech). Pike says his “weren’t terrible”, which is less than a resounding statement, but there’s a reason for that. These are a good choice for training and for just being able to brag about how many AK mags you have stacked up. Don’t take ’em someplace someone might be shooting back unless you just don’t have a choice.


KCI mags are a budget magazine. Should you carry one in a fightin’ gun? I wouldn’t. But there’s nothing wrong with having some on board when you hit the range or do some training. They’ll help you get some good reps in when it comes to getting your weapon up and running again. Plus if you post a picture with them to social media it’ll give all your know-it-all friends the chance to make fun of you.

10. KCI AK-47 7.62×39 Steel Magazine (30 rounds)

Steel AK mags from KCI

KCI magazines: Yongary in Seoul
Like Yongary and other Seoul food, KCI magazines come from Korea.

• Khyber Pass AK Magazine Options

Just kidding. We don’t actually sell anything from Darra Adam Khel. Or anywhere else in the Khyber Pass. Sorry, not sorry. But we do appreciate the effort they put into their work!

Khyber Pass AK? Maybe. Might just be a well decorated production rifle.
A Khyber Pass AK? Maybe. Maybe just a well-decorated production gun. They’re like the jingle trucks of the gun world.
Khyber Pass AK (or just a well decorated one)
Leather sling and a little bedazzlement…way cooler than Cerakote, eh?

Drum Magazine Bonus: what we think are the

Best AK Drum Mag Options

We’ve given you our opinion on some good AK magazine options: now we’ll give you the low-down on the best AK drum mag brands and models. 

KCI AK-47 Drum Magazine (75 rounds)

AK 47 drum magazine from KCI

ProMag AK-47 Drum Magazine (50 rounds)

AK47 drum magazine from ProMag

Khyber Pass AK
Custom Cerakote it’s not — but that isn’t a Bad Thing! (This is just an excuse to drop in another cool picture: we still don’t sell them. But you could prolly do some cool stuff on your own with an Flat Dark Earth ProMag or FDE TAPCO; since they don’t cost much, it won’t be a big deal if you color outside the lines.)

AK Mags: Do you want to know more?

Here’s the full AK47 video from Smarter Every Day and the Slow Mo Guys. Thank ya Popular Science!

AK 47 Magazine Use: Other Options

The AK 47 Steel Magazine: Why it’s reliable

Nearly every author who writes about the Avtomat Kalashnikova with anything positive to say, lauds the rifle’s legendary reliability – and with good cause. At a time when select-fire and fully automatic firearms tended to be overly sensitive to fouling, dirt and debris, the AK stood alone. To the average joe, the little Soviet lead-slinger seemed to not only shrug off neglect, but thrive with it.

Understanding AK 47 steel magazine reliability

While the rifle’s reliability is often over-stated, AK magazines rarely receive the same amount of praise. Today, that makes sense; most firearms ship with, or utilize a reliable magazine of some variety. But back when the Avtomat was first conceived, detachable magazines tended to be relatively fragile an somewhat unreliable unless kept clean.

In fact, the STANAG – the universal AR15/M16 magazine, didn’t begin to approach the levels of the original AK magazine until the introduction of the Magpul PMAG in 2006/2007.

But why is that? The technology behind all box magazines are basically the same with minor variations. Yet, some are irrefutably more reliable than others. – So what makes the AK’s magazine so reliable?

AK 47 Steel Magazines

a steel ak47 magazine baseplate

Whether tube, fixed, rotary or box-type, magazines have historically been made of steel. Notable exceptions include the Glock’s polymer magazines and the original M16 aluminum mags, but most firearms that came before these used steel mags.

If that’s the case, what makes the AK’s steel mag unique?

For starters, it doesn’t just use steel, but thick, welded and folded steel. The spine of the steel AK magazine consists of two 0.75mm pieces of steel spot-welded together with 6mm of extra material to reinforce.

The front of the magazine is the same, but lacks the spine’s protrusion – but still gains in the use of heavy gauge, welded-steel. The outer body of the magazine consists of the same .75mm steel, but with pressed ribs for added strength and tensile resistance. The result, is a magazine that is literally impossible for an average human to crush using only their hands.

This durability ensures the magazine will retain its shape, and feed rounds consistently. The Soviet’s built these magazines to outlast the soldiers carrying them, and it shows. It’s why steel magazines will pop up in arid locations in the hands of farmers using them as spades – the steel is heavy duty enough for hard use and abuse.

Positive lock-up

steel feed lips on an ak 47 steel magazine

Another aspect that lends itself to the Soviet magazine’s die-hard reliability is its positive lock-up. Where Western rifles, like the M16 and M4, are secured inside a magazine well with a tab inserted into a small notch in the body, AK mags take a more pragmatic approach.

If you’ve ever heard the term, ‘Rock and lock’ you have the general gist of how these mags insert in an AK rifle. They interface with the Avtomat’s receiver with two portions of a thick, 2mm collar that surrounds the top of the magazine.

The first is a heavy duty, milled tab that engages the magazine release lever attached to the trigger guard. The second is a notch milled out of the opposite side of the same collar. To insert, the shooter inserts to magazine at approximately 45 degrees tilted backwards, and drags the front of the magazine (where the notch is) along the inside of the magazine well.

Once the notch catches on the locking tab inside the receiver, they rock the rear of the magazine up and back, until the magazine’s tab engages the release lever with an audible, ‘clunk’.

This is slower than the M4’s push-button release, but is more fool-proof. The AK magazine is either in or it’s not. Soldiers running an AK won’t run in to the issue Western soldiers face of not fully seating a magazine in the well, firing a round, and dropping a mostly full magazine into the dirt. That isn’t to say it isn’t possible, but it’s much less likely to occur with this more positive system.

Anti-tilt follower

AK 47 anti tilt followerMagpul’s anti-tilt follower was seen as revolutionary when they introduced it for the M4’s STANAG magazines – but the Soviets had been running these for decades before.

The follower on a magazine, is the component that interfaces between the feeding spring, and the cartridges themselves. Every magazine uses them, except for the Boberg XR9/Bond Arms Bullpup pistol – but that’s a different story entirely.

For every other firearm, the follower is necessary to ensure that the cartridges being pushed towards the action, stay under consistent pressure while maintaining proper alignment. Magazine followers fail, when dirt/debris is introduced to the inside of the magazine, and cause the follower to bind.

Another way they fail, is when the rounds inside apply uneven friction inside the magazine body, and the follower itself tilts forwards or backwards. When this happens, the rounds can’t properly reach the chamber, and the gun normally encounters a failure to fed (FTF) or what the IDF calls a, ‘Type 1’ malfunction – action close, unable to fire. (in this case, because the chamber is empty)

The AK magazine follower prevents tilting, by incorporating long pieces of steel on the follower that act as guiding tabs. These tabs prevent the follower from tilting more than five or so degrees in either direction. These tabs also increase friction, but the magazine spring is sufficiently stout to compensate for this.

While these features make the AK magazine very robust, the trade-off is weight. While the ribbed magazines are lighter than the original slab-sided ones, they are by no means, ‘light’. Still, if reliability is your mantra, few mags can outlast the venerable AK 47 steel magazine.

David Reeder's Wu Tang name is Lucky Prophet. He is a retired AF veteran, former Peace Officer, and current Tier 2.5 writer-operator. Over the course of his career, he has worked a variety of military and lE billets, served as an Observer-Controller at the National Homeland Security Training Center, a MOUT instructor, and an MTT tracking instructor - all of which sounds much cooler than it really was. Although he only updates his website once in a very great while, he can absolutely be relied upon to post to social media (@reederwrites) at least once a month. -Ish.

Sign Up for Newsletter

Let us know what topics you would be interested:

4 thoughts on “AK 47 Magazine Muster: for your Kalash Collection

    1. If I had to guess, I’d wager it is an RS Regulate mount. They are pricey, but generally considered the best. They also sit very low to the receiver. Also yes, that is Magpul furniture. MOE hand guard and a Zhukov stock.

  1. My US Palm mags are solid locked in. I have some 10rd pro mags that are ok but one of them only holds 8 rounds. I have several steel mags that I am not sure where they were made and can’t find any markings on it ( gun show purchase). I love my Century VSKA.

  2. Just saw and read this article. I guess it has been out for a few years. I have a few different Pro Mags I will be willing to sell you, cheap. Can you say Junk. KCI is not any better. I acquired a few clear plastic Bulgarian mags, which broke on the second time out (rear lug snaped off on one- feed lips snapped off on another one) Black plastic Bulgarian mags are holding up well.
    Just like anything these days, you get what you pay for. Good quality costs, period. So don’t waste your time or money with poor quality mags. Same with AKs, or FALs, or HK91s, or ….. Moose USMC Recon. Seven Iraq/ Afghanistan deployments

Leave a Reply

Your email address will not be published.

© 2023 GunMag Warehouse. All Rights Reserved.
Copy link
Powered by Social Snap